Danh mục sản phẩm
Hổ trợ trực tuyến
BRAND NAME I
BRAND NAME II
Fanpage Facebook
Liên kết website
Thống kê
- Đang online 0
- Hôm nay 0
- Hôm qua 0
- Trong tuần 0
- Trong tháng 0
- Tổng cộng 0
FLEXIBLE COUPLINGS
COUPLINGS JAW FLENDER ZAPEX ZN
• Parallel couple coupling
• Long service life and low maintenance required, lubricated by gear reliability
• Small size, low quality
• Suitable for use in explosive atmospheres
• Torque range from TKN = 1,020 Nm to 162,500 Nm in 12 sizes
• Temperature range: from –20°C to +80°C
0985.288.164
37 lượt
COUPLINGS JAW FLENDER N-EUPEX TYPE P
• N-EUPEX coupling has high torsion in operation
• N-EUPEX coupling is made of high quality cast iron
• Suitable for use in explosive atmospheres
• Rated torque range from TKN = 12 Nm to 85,000 Nm in 23 sizes
• Temperature range from –50 °C to +100 °C
0985.288.164
19 lượt
COUPLINGS JAW FLENDER N-EUPEX TYPE O
• N-EUPEX coupling has high torsion in operation
• N-EUPEX coupling is made of high quality cast iron
• Suitable for use in explosive atmospheres
• Rated torque range from TKN = 12 Nm to 85,000 Nm in 23 sizes
• Temperature range from –50 °C to +100 °C
0985.288.164
17 lượt
COUPLINGS JAW FLENDER N-EUPEX TYPE H
• N-EUPEX coupling has high torsion in operation
• N-EUPEX coupling is made of high quality cast iron
• Suitable for use in explosive atmospheres
• Rated torque range from TKN = 12 Nm to 85,000 Nm in 23 sizes
• Temperature range from –50 °C to +100 °C
0985.288.164
16 lượt
COUPLINGS JAW FLENDER N-EUPEX TYPE E
• N-EUPEX coupling has high torsion in operation
• N-EUPEX coupling is made of high quality cast iron
• Suitable for use in explosive atmospheres
• Rated torque range from TKN = 12 Nm to 85,000 Nm in 23 sizes
• Temperature range from –50 °C to +100 °C
0985.288.164
15 lượt
COUPLINGS JAW FLENDER N-EUPEX TYPE DBDR
• N-EUPEX coupling has high torsion in operation
• N-EUPEX coupling is made of high quality cast iron
• Suitable for use in explosive atmospheres
• Rated torque range from TKN = 12 Nm to 85,000 Nm in 23 sizes
• Temperature range from –50 °C to +100 °C
0985.288.164
14 lượt
COUPLINGS JAW FLENDER N-EUPEX TYPE D
• N-EUPEX coupling has high torsion in operation
• N-EUPEX coupling is made of high quality cast iron
• Suitable for use in explosive atmospheres
• Rated torque range from TKN = 12 Nm to 85,000 Nm in 23 sizes
• Temperature range from –50 °C to +100 °C
0985.288.164
17 lượt
COUPLINGS JAW FLENDER N-EUPEX TYPE B
• N-EUPEX coupling has high torsion in operation
• N-EUPEX coupling is made of high quality cast iron
• Suitable for use in explosive atmospheres
• Rated torque range from TKN = 12 Nm to 85,000 Nm in 23 sizes
• Temperature range from –50 °C to +100 °C
0985.288.164
16 lượt
COUPLINGS JAW FLENDER N-EUPEX TYPE ABD
• N-EUPEX coupling has high torsion in operation
• N-EUPEX coupling is made of high quality cast iron
• Suitable for use in explosive atmospheres
• Rated torque range from TKN = 12 Nm to 85,000 Nm in 23 sizes
• Temperature range from –50 °C to +100 °C
0985.288.164
14 lượt
COUPLINGS JAW FLENDER N-EUPEX TYPE A
• N-EUPEX coupling has high torsion in operation
• N-EUPEX coupling is made of high quality cast iron
• Suitable for use in explosive atmospheres
• Rated torque range from TKN = 12 Nm to 85,000 Nm in 23 sizes
• Temperature range from –50 °C to +100 °C
0985.288.164
16 lượt
COUPLINGS JAW FLENDER N-EUPEX TYPE DK
• N-EUPEX coupling has high torsion in operation
• N-EUPEX coupling is made of high quality cast iron
• Suitable for use in explosive atmospheres
• Rated torque range from TKN = 12 Nm to 85,000 Nm in 23 sizes
• Temperature range from –50 °C to +100 °C
0985.288.164
14 lượt
COUPLINGS JAW FLENDER N-EUPEX
• N-EUPEX coupling has high torsion in operation
• N-EUPEX coupling is made of high quality cast iron
• Suitable for use in explosive atmospheres
• Rated torque range from TKN = 12 Nm to 85,000 Nm in 23 sizes
• Temperature range from –50 °C to +100 °C
0985.288.164
16 lượt
COUPLINGS JAW FLENDER TYPE BWT-AB
• Damping shaft couplings can be commonly used to compensate for misaligned shafts
• Rated torque range from TKN = 12 Nm to 4,650 Nm in 10 sizes
• High torque (maximum torque = 3 × rated torque) for easy peak torque absorption
• High-quality washers ensure uniform load distribution and therefore optimum life in all conditions
• Temperature range: from - 50 °C to +100 °C
0985.288.164
13 lượt
COUPLINGS JAW FLENDER TYPE BWT-B
• Damping shaft couplings can be commonly used to compensate for misaligned shafts
• Rated torque range from TKN = 12 Nm to 4,650 Nm in 10 sizes
• High torque (maximum torque = 3 × rated torque) for easy peak torque absorption
• High-quality washers ensure uniform load distribution and therefore optimum life in all conditions
• Temperature range: from - 50 °C to +100 °C
0985.288.164
39 lượt
COUPLINGS JAW FLENDER TYPE BWT-A
• Damping shaft couplings can be commonly used to compensate for misaligned shafts
• Rated torque range from TKN = 12 Nm to 4,650 Nm in 10 sizes
• High torque (maximum torque = 3 × rated torque) for easy peak torque absorption
• High-quality washers ensure uniform load distribution and therefore optimum life in all conditions
• Temperature range: from - 50 °C to +100 °C
0985.288.164
13 lượt
COUPLINGS JAW FLENDER TYPE BWN
• Damping shaft couplings can be commonly used to compensate for misaligned shafts
• Rated torque range from TKN = 12 Nm to 4,650 Nm in 10 sizes
• High torque (maximum torque = 3 × rated torque) for easy peak torque absorption
• High-quality washers ensure uniform load distribution and therefore optimum life in all conditions
• Temperature range: from - 50 °C to +100 °C
0985.288.164
12 lượt
COUPLINGS JAW FLENDER TYPE BNT
• Damping shaft couplings can be commonly used to compensate for misaligned shafts
• Rated torque range from TKN = 12 Nm to 4,650 Nm in 10 sizes
• High torque (maximum torque = 3 × rated torque) for easy peak torque absorption
• High-quality washers ensure uniform load distribution and therefore optimum life in all conditions
• Temperature range: from - 50 °C to +100 °C
0985.288.164
11 lượt
COUPLINGS JAW FLENDER N-BIPEX
• Damping shaft couplings can be commonly used to compensate for misaligned shafts
• Rated torque range from TKN = 12 Nm to 4,650 Nm in 10 sizes
• High torque (maximum torque = 3 × rated torque) for easy peak torque absorption
• High-quality washers ensure uniform load distribution and therefore optimum life in all conditions
• Temperature range: from - 50 °C to +100 °C
0985.288.164
12 lượt
COUPLINGS JAW FLENDER N-EUPEX DS TYPE HDS
• The N-EUPEX DS coupling allows the input and output side to be disconnected when the washers fail due to overload or wear. The metal parts of the DS coupling can then rotate freely in opposite directions.
• Damping shaft couplings can be commonly used to compensate for misaligned shafts
• No maintenance even when used in explosive atmospheres
• Rated torque from TKN = 60 Nm to 21,200 Nm with 19 sizes
• Temperature range: from –50 °C to +100 °C
0985.288.164
14 lượt
COUPLINGS JAW FLENDER N-EUPEX DS TYPE BDS
• The N-EUPEX DS coupling allows the input and output side to be disconnected when the washers fail due to overload or wear. The metal parts of the DS coupling can then rotate freely in opposite directions.
• Damping shaft couplings can be commonly used to compensate for misaligned shafts
• No maintenance even when used in explosive atmospheres
• Rated torque from TKN = 60 Nm to 21,200 Nm with 19 sizes
• Temperature range: from –50 °C to +100 °C
0985.288.164
13 lượt
COUPLINGS JAW FLENDER N-EUPEX DS TYPE ADS
• The N-EUPEX DS coupling allows the input and output side to be disconnected when the washers fail due to overload or wear. The metal parts of the DS coupling can then rotate freely in opposite directions.
• Damping shaft couplings can be commonly used to compensate for misaligned shafts
• No maintenance even when used in explosive atmospheres
• Rated torque from TKN = 60 Nm to 21,200 Nm with 19 sizes
• Temperature range: from –50 °C to +100 °C
0985.288.164
13 lượt
COUPLINGS JAW FLENDER N-EUPEX DS
• The N-EUPEX DS coupling allows the input and output side to be disconnected when the washers fail due to overload or wear. The metal parts of the DS coupling can then rotate freely in opposite directions.
• Damping shaft couplings can be commonly used to compensate for misaligned shafts
• No maintenance even when used in explosive atmospheres
• Rated torque from TKN = 60 Nm to 21,200 Nm with 19 sizes
• Temperature range: from –50 °C to +100 °C
0985.288.164
13 lượt
COUPLINGS JAW FLENDER RUPEX TYPE RBS
• RUPEX couplings are used as flexible compensating couplings in all applications requiring a reliable transmission of torque under extreme operating conditions.
• Convenient for mounting and ensures maintenance-free operation.
• Compact design; low weight and mass moment of inertia
Regardless of the direction of rotation
• Suitable for use in explosive atmospheres
• Nominal torque from TKN = 200 Nm to 1,690,000 Nm with 26 Size
• Temperature range: from –50 °C to +100 °
0985.288.164
17 lượt
COUPLINGS JAW FLENDER RUPEX TYPE RWB
• RUPEX couplings are used as flexible compensating couplings in all applications requiring a reliable transmission of torque under extreme operating conditions.
• Convenient for mounting and ensures maintenance-free operation.
• Compact design; low weight and mass moment of inertia
Regardless of the direction of rotation
• Suitable for use in explosive atmospheres
• Nominal torque from TKN = 200 Nm to 1,690,000 Nm with 26 Size
• Temperature range: from –50 °C to +100 °
0985.288.164
17 lượt
COUPLINGS JAW FLENDER RUPEX TYPE RFS
• RUPEX couplings are used as flexible compensating couplings in all applications requiring a reliable transmission of torque under extreme operating conditions.
• Convenient for mounting and ensures maintenance-free operation.
• Compact design; low weight and mass moment of inertia
Regardless of the direction of rotation
• Suitable for use in explosive atmospheres
• Nominal torque from TKN = 200 Nm to 1,690,000 Nm with 26 Size
• Temperature range: from –50 °C to +100 °
0985.288.164
12 lượt
COUPLINGS JAW FLENDER RUPEX TYPE RFN
• RUPEX couplings are used as flexible compensating couplings in all applications requiring a reliable transmission of torque under extreme operating conditions.
• Convenient for mounting and ensures maintenance-free operation.
• Compact design; low weight and mass moment of inertia
Regardless of the direction of rotation
• Suitable for use in explosive atmospheres
• Nominal torque from TKN = 200 Nm to 1,690,000 Nm with 26 Size
• Temperature range: from –50 °C to +100 °
0985.288.164
35 lượt
COUPLINGS JAW FLENDER RUPEX TYPE RWS
• RUPEX couplings are used as flexible compensating couplings in all applications requiring a reliable transmission of torque under extreme operating conditions.
• Convenient for mounting and ensures maintenance-free operation.
• Compact design; low weight and mass moment of inertia
Regardless of the direction of rotation
• Suitable for use in explosive atmospheres
• Nominal torque from TKN = 200 Nm to 1,690,000 Nm with 26 Size
• Temperature range: from –50 °C to +100 °
0985.288.164
11 lượt
COUPLINGS JAW FLENDER RUPEX TYPE RWN
• RUPEX couplings are used as flexible compensating couplings in all applications requiring a reliable transmission of torque under extreme operating conditions.
• Convenient for mounting and ensures maintenance-free operation.
• Compact design; low weight and mass moment of inertia
Regardless of the direction of rotation
• Suitable for use in explosive atmospheres
• Nominal torque from TKN = 200 Nm to 1,690,000 Nm with 26 Size
• Temperature range: from –50 °C to +100 °
0985.288.164
13 lượt
RUPEX COUPLINGS JAW FLENDER
• RUPEX couplings are used as flexible compensating couplings in all applications requiring a reliable transmission of torque under extreme operating conditions.
• Convenient for mounting and ensures maintenance-free operation.
• Compact design; low weight and mass moment of inertia
Regardless of the direction of rotation
• Suitable for use in explosive atmospheres
• Nominal torque from TKN = 200 Nm to 1,690,000 Nm with 26 Size
• Temperature range: from –50 °C to +100 °
0985.288.164
12 lượt